中文 | English

 
Products

THAT 5171

Update Time : 2018-06-27 View : 3225
  • Features / Applications / Description
    filler
    filler
    FEATURES

    • Ideal mate for THAT1580 preamplifiers
    filler
    • Wide gain range:
       +5.6 dB
       +13.6 to +68.6 dB in 1 dB steps
    filler
    • Wide supply range: ±5V to ±17V
    filler
    • Wide output swing: +27dBu (±17V sup.) 
    filler
    • Wide input swing: +22dBu (±17V sup.)
    filler
    • Low THD+N: 0.0003% @ 22dB gain
    filler
    • Integrated differential servo minimizes output offset 
    filler
    • Zero-crossing detector minimizes switching noise
    filler
    • Flexible, addressable SPI interface
    filler
    • Four general-purpose digital outputs
    filler
    • Small 7mm x 7mm QFN32 package

    filler

    filler Datasheet Download
    5171 Datasheet (522 kB)
    High Performance Digital Preamplifier Controller

    filler
    THAT 5171 Block Diagram

    DESCRIPTION

    The THAT5171 is a digital gain controller for low-noise, analog, differential, current-feedback audio preamplifiers such as the THAT1580. When used in conjunction with an appropriate analog gain block, the 5171 can set gain to 5.6dB, or any gain from 13.6dB to 68.6dB in 1dB steps, while preserving low noise and distortion. It operates from ±5V to ±17V supplies, supporting input signal levels as high as +22 dBu (at 5.6dB gain, and ±17V supplies) in combination with the 1580 (without an external input pad). The 5171 includes a differential servo and zero-crossing detector to minimize dc offsets and glitches (zipper noise) during gain adjustments.

    The 5171 is controlled via an addressable serial-peripheral interface (SPI) port. Four General Purpose Outputs (GPOs) can be controlled via this interface. The GPOs may be connected to input pads, analog switches, mute circuits, LEDs, etc. The SPI bus supports read-back so that host software can verify proper operation.

    The 5171 was designed to mate perfectly with THAT1580 Differential Audio Preamplifier ICs. Together, these ICs provide a best-of-class solution for digitally-controllable audio preamplifier applications. However, for designers who prefer a more customized solution, the 5171 may also be used to control a discrete preamplifier.
    filler

    filler

    filler
    APPLICATIONS
    filler
    • Digitally controlled microphone preamplifiers
    filler
    • Digitally-controlled instrumentation amplifiers
    filler
    • Digitally-controlled differential amplifiers
    filler
    • Audio mixing consoles
    filler
    • PC audio breakout boxes
    filler
    • Audio distribution systems
    filler
    • Digital audio snakes
    filler
    • Portable audio recorders 
    filler

    filler
    Key Specifications (see 5171 datasheet for complete specifications)
    filler
    fillerParameter
    filler
    Conditions
    filler
    5171
    Typical

    filler
    Units
    filler
    fillerAnalog Supply Voltage

    Referenced to AGND

    4.75 - 17

    V
    fillerDigital Supply Voltage

    3.0 - 3.6
    V
    fillerAnalog Supply Current
    No signal
    8.3
    mA
    fillerDigital Supply Current

    2
    µA
    fillerMax Differential Input Level

    21
    dBu
    fillerMax Differential Output Level

    27
    dBu
    fillerGain Range Step Size 13.6 dB £ Gain ³ 68.6 dB 1 dB
    fillerGain Range Error All gain settings ±0.25 dB
  • Model Package Order Number Pricing
    (1000)
    Min Order
    Quantity
    Reference
    5171 32 pin QFN 5171N32-U $6.70 46 Request
    Samples
    32 pin QFN
    Tape & Reel
    5171N32-UR Contact us 2000
    1580/5171
    Demo Board
    1580/5171-DEMO $250.00 1
    filler
    All 5171 parts are RoHS compliant.
    Minimum order quantity (MOQ) is one tube or one reel. Parts must be ordered in multiples of the MOQ.
    Samples are available to qualified applicants.
    Pricing is subject to change.
  • Design Note 140   Input and Output Circuits for THAT Preamplifier ICs (244k)


  • Digitally Controlled Microphone Preamplifier Selector

    A side by side comparison of the features and specifications of our digitally controlled microphone preamplifier chip sets.


    1580/5171 Digitally-Controlled Mic Preamp Demo Boards - The THAT 1580/5171 Digitally-Controlled Mic Preamp Demo Board (US$250) allows developers to evaluate the performance of the 1580/5171 chipset. The demo board provides a balanced audio input on a Neutrik "combo" connector with 48V phantom power, and a balanced audio output on XLR and ¼" TRS connectors. The supplied graphical user interface (GUI) controls all functions in the 5171 chip via USB. A prototyping area is available for adding or modifying circuitry. See the 1580/5171 DEMO User's Guide for more information.


    5171 Surface Mount Adapter Board - For our integrated circuits which are only available in surface mount packages THAT Corporation offers adapter boards which allow one of these surface-mount ICs to interface to a circuit board via traditional thru-hole mounting. These adapters make it easy for a design engineer to evaluate our surface-mount products on a prototype board without having to employ SMT technology. Adapter boards are available to qualified applicants.


    5171 Material Data Declaration Sheet

    Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

Shenzhen Xinshi Ming Technology Co., Ltd.

Address: Fortune Tower, Lin Fa Fortune Tower, 1 Shenhua street, Henggang street, Longgang District, Shenzhen. 308

Phone: 86-755-82945939, 86-755-83790999

Fax: 86-755-83298555

E-mail: Rogerwan@xsmtec.com

Copyright No. Copyright (C) 2009-2012 Shenzhen Xinshi Ming Technology Co., Ltd. No. 17003319, Guangdong ICP.