中文 | English

 
Products

THAT 1583/5173

Update Time : 2018-06-27 View : 3148
  • Features / Applications / Description
    filler
    filler
    FEATURES

    • Versatile two-chip solution: 
     - 1583 Programmable analog gain block 
     - 5173 Digital gain controller
    filler
    • Accommodates full pro audio levels
      +26.4 dBu max input with ±17V supplies
    filler
    • Programmable gain: 0 to 60 dB in 3 dB steps
    filler
    • Low Noise: -125 dBu EIN, 60 dB gain, Rs=150 Ω 
    filler
    • Low THD+N: < 0.0006% @ 21 dB gain
    filler
    • Integrated servo minimizes output offset
    filler
    • Integrated zero crossing detector minimizes switching noise
    filler 
    • Daisy Chainable SPI control interface
    filler 
    • Four general purpose outputs (GPOs)
    filler
    • Small footprint: 
       4 x 4 mm QFN16 (1583) 
       5 x 5 mm QFN24 (5173)

    filler

    filler

     

    Product Datasheets Download
    filler
    5173 Datasheet (350 kB)
    Digital Mic Preamp Controller
    filler
    1583 Datasheet (190 kB)
    Differential Audio Preamplifier
    Demo Board Datasheet & Software
    filler
    5173-DEMO Datasheet 
    (940 kB PDF file)
    filler
    5173-DEMO Software 
    (3 MB ZIP file)
    filler filler

    THAT 1570/5173 Digital Microphone Preamp Circuit

    filler
    DESCRIPTION

    The THAT1583 and THAT5173 ICs enable digitally controlled microphone preamplifier applications with unprecedented performance. Operating on maximum ±17V supplies, the chipset accepts pro audio input levels (+26.4dBu max) without an input pad. Gain is adjustable from 0dB to 60dB in 3dB increments. The 5173’s built-in zero-crossing detector and other patent-pending techniques for reducing zipper noise enable very smooth and silent gain changes. A differential servo reduces output offsets to less than 1.75 mV.

    Four general purpose outputs on the 5173 can be connected to a variety of peripheral functions, e.g. input pad, phantom power switches, signal routing switches, LED indicators, etc. Separating the analog mic pre front end (THAT1583) from the digital functions and switched resistor ladder (THAT5173) allows each IC to be optimized for high performance.
    filler

    filler
    Key Specifications (see the 5173 and 1583 datasheets for complete specifications)
    filler
    fillerParameter
    filler
    Conditions
    filler
    1583/5173
    Combination

    filler
    Units
    filler
    fillerSupply Voltage
      ± 17 V
    fillerSupply Current
    No Signal 7.0 (1583)
    7.6 (5173)
    15.3 (Total)
    mA
    fillerPower
    @ +/- 5V 146 mW
    fillerTHD + N
    21 dB gain
    0.0006
    %
    fillerEquivalent Input Noise, Rs = 150 Ω
    0 dB gain
    30 dB gain

    60 dB gain

    -100
    -118
    -125

    dBu
    fillerMax Differential Input
    0 dB gain
    30 dB gain
    60 dB gain

    26.4
    -3
    -33

    dBu
    fillerGain Range
     
    0 - 60
    dB
    fillerStep Size

     

    3
    dB
    fillerMax Gain Error   Typ: 0.2
    Max: 0.5
    dB
  • Model Package Order Number Pricing
    (1000)
    Min Order
    Quantity
    Reference
    1583 16 pin QFN 1583N16-U $5.17* 92 Request
    Samples
    16 pin QFN
    Tape & Reel**
    1583N16-UR 2000
    5173 24 pin QFN 5173N24-U 46
    24 pin QFN
    Tape & Reel**
    5173N24-UR 2000
    1583/5173
    Demo Board
    1583/5173DEMO $250.00 1

    filler
    All 1583 and 5173 parts are RoHS compliant.
    Minimum order quantity (MOQ) is one tube or one reel. Parts must be ordered in multiples of the MOQ.
    Samples are available to qualified applicants.
    Pricing is subject to change.

    * Price when 1583 and 5173 are purchased as a pair. Pricing varies when purchased separately.

    **There is a small additional charge for tape and reel packaging.

  • Design Note 140   Input and Output Circuits for THAT Preamplifier ICs (244k)


    More Analog Secrets Your Mother Never Told You (915k)

    At the 127th AES Convention attendees were invited to attend a THAT exhibitor seminar — "More Analog Secrets Your Mother Never Told You". A sequel to our popular first "Analog Secrets" seminar, this new presentation exposes more design secrets including “extreme performance” microphone preamps, protecting audio inputs/outputs during phantom power faults, and maintaining high dynamic range in low cost applications.

  • Digitally Controlled Microphone Preamplifier Selector

    A side by side comparison of the features and specifications of our digitally controlled microphone preamplifier chip sets.


    1583/5173 Digitally-Controlled Mic Preamp Demo Boards - A THAT Digitally-Controlled Mic Preamp Demo Board (US$250) allows developers to evaluate the performance of the THAT1583 / THAT5173 chipset. The demo board provides a balanced audio input on a Neutrik "combo" connector with 48V phantom power, and a balanced audio output on XLR and ¼" TRS connectors. The supplied graphical user interface (GUI) controls all functions in the 5173 chip via USB. A prototyping area is available for adding or modifying circuitry. See the 5173 DEMO Datasheet for more information.


    1583 and 5173 Surface Mount Adapter Boards - For our integrated circuits which are only available in surface mount packages THAT Corporation offers adapter boards which allow one of these surface-mount ICs to interface to a circuit board via traditional thru-hole mounting. These adapters make it easy for a design engineer to evaluate our surface-mount products on a prototype board without having to employ SMT technology. Adapter boards are available to qualified applicants.


    1583 Material Data Declaration Sheet

    Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.


    5173 Material Data Declaration Sheet

    Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

Shenzhen Xinshi Ming Technology Co., Ltd.

Address: Fortune Tower, Lin Fa Fortune Tower, 1 Shenhua street, Henggang street, Longgang District, Shenzhen. 308

Phone: 86-755-82945939, 86-755-83790999

Fax: 86-755-83298555

E-mail: Rogerwan@xsmtec.com

Copyright No. Copyright (C) 2009-2012 Shenzhen Xinshi Ming Technology Co., Ltd. No. 17003319, Guangdong ICP.